27
English
4
Press
S
, then use the
numeric keypad
(0-9)
to enter the disc number.
➜
"
DISC X
" appears.
5
Press
T
, then use the
numeric keypad
(0-9)
to enter the track number.
➜
"
TRACK X
" appears.
6
Press
OK
to store the track.
7
Repeat steps
4
~
6
to select other discs and
tracks.
8
Press
ÉÅ
to start program playback.
➜
Only the tracks programmed from audio
CDs and VCDs will play.
9
Press
Ç
to stop playback or exit program
mode.
Notes:
– Pressing OPEN•CLOSE button of the
programmed disc tray will erase the program.
– If you do not press any buttons within 20
seconds, the system will exit programming mode.
Clearing the program
●
Stop playback, then press and hold
Ç
.
➜
PROG
disappears from the display panel and
"
PROGRAM CLEARED
" appears.
Note:
– If the DVD system is disconnected from the
power supply, the program will be erased.
Using the menu bar to program
IMPORTANT!
You have to turn on your TV and set to
the correct Video In channel.
(See page 21
“
Setting the TV
”
.)
Disc Operations
1
Stop playback, then press
SYSTEM MENU
.
➜
The menu bar will appear across the top of
the TV screen.
2
Use the joystick (
1
2
) to select
and press
4
to enter the program menu.
3
Use the joystick (
1
2
3
4
) to move within the
program menu and use the
numeric keypad
(0-9)
to enter the disc and track number to
program.
4
Press
ÉÅ
to start program playback.
➜
Only the tracks programmed from audio
CDs and VCDs will play.
●
In stop mode, you can press
PROG
on the
front panel to toggle between program on and
off.
To clear the program
●
Stop playback, then press and hold
Ç
.
REPEAT
REPEAT
DISC SKIP
DISC MENU
PROGRAM
SYSTEM MENU
SEATING
ZOOM
PREV
NEXT
STOP
PLAY/PAUSE
OK
1
4
2
3
,
PROGRAM
DISC
TRACK
1
2
3
4
5
6
