25
Horizontal flicker appears
• Adjust the image using the “Auto”
function in OSD Main Controls�
• Eliminate the vertical bars using
the Phase/Clock of Setup in OSD
Main Controls� It is valid only in VGA
mode�
Image appears blurred, indistinct or too
dark
• Adjust the contrast and brightness
on On-Screen Display�
An "after-image", "burn-in" or "ghost
image" remains after the power has
been turned off.
• Uninterrupted display of still or
static images over an extended
period may cause "burn-in", also
known as "after-imaging" or "ghost
imaging", on your screen� "Burn-in",
"after-imaging", or "ghost imaging"
is a well-known phenomenon in
LCD panel technology� In most cases,
the "burn-in" or "after-imaging"
or "ghost imaging" will disappear
gradually over a period of time after
the power has been switched off�
• Always activate a moving screen
saver program when you leave your
monitor unattended�
• Always activate a periodic screen
refresh application if your LCD
monitor will display unchanging
static content�
• Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe “burn-in” or
“after-imaging” or “ghost imaging”
symptoms that will not disappear
and cannot be repaired� The damage
mentioned above is not covered
under your warranty�
Image appears distorted� Text is fuzzy or
blurred�
• Set the PC’s display resolution
to the same mode as monitor’s
recommended screen native
resolution�
Green, red, blue, dark, and white dots
appears on the screen
• The remaining dots are normal
characteristic of the liquid crystal
used in today’s technology, Please
refer the pixel policy for more detail�
*
The "power on" light is too strong and
is disturbing
• You can adjust “power on” light
using the power LED Setup in OSD
main Controls�
For further assistance, refer to the
Service contact information listed
in Important information manual
and contact Philips customer service
representative�
* Functionality different according to
display�
