27
9. Troubleshooting & FAQs
Q10:
What is Image Sticking, or Image
Burn-in, or After Image, or Ghost
Image in monitor panels?
Ans.:
Uninterrupted display of still or
static images over an extended
period may cause "burn-in",
also known as "after-imaging" or
"ghost imaging", on your screen.
"Burn-in", "after-imaging", or
"ghost imaging" is a well-known
phenomenon in monitor panel
technology. In most cases, the
"burned in" or "after-imaging"
or "ghost imaging" will disappear
gradually over a period of
time after the power has been
switched off.
Always activate a moving screen
saver program when you leave
your monitor unattended.
Always activate a periodic
screen refresh application if your
monitor will display unchanging
static content.
Warning
Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe “burn-in” or “after-
image” or “ghost image” symptoms
that will not disappear and cannot be
repaired. The damage mentioned above
is not covered under your warranty.
Q11:
Why is my Display not showing
sharp text, and is displaying jagged
characters?
Ans.:
Your monitor works best at its
native resolution of 2560 x 1440.
For best display, please use this
resolution.
Q12:
How to unlock/lock my hot key?
Ans.:
Please press
for 10 seconds to
unlock/lock the hot key, by doing
so, your monitor pops out “At-
tention” to show the unlock/lock
status as shown below illustra-
tors.
Q13: Where can I find Important
Information manual mentioned
in EDFU?
Ans.: Important Information manual
can be download on the Philips
website support page.
