18
English
FM Radio Reception
Tuning to radio stations
1
Press
SOURCE
on the top of the system or
FM
on the remote to select FM.
2
Press and hold the control knob on the front
panel of the system to the left or right
(corresponding to
S
/
T
) or
5
/
6
on the
remote.
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning:
SEARCH
.
3
Repeat step
2
if necessary until you find the
desired station.
●
To tune to a weak station, press the control
knob on the front panel of the system to the left
or right (corresponding to
S
/
T
) or
5
/
6
on the remote briefly and repeatedly until
you have found optimal reception.
Programming radio stations
You can store up to a total of 20 FM radio
stations in the memory.
Automatic programming
Automatic programming will start from preset 1
and stop at the last programmed station. All the
former programmed radio stations will be
overridden.
1
Press
PRESET -/+
on the top of the system or
¡
/
™
on the remote to select the preset
number where programming should star t.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press and hold the control knob on the front
panel upward (corresponding to
PROGRAM
)
or
PROG
on the remote for more than 2
seconds to activate programming.
➜
AUTO
is displayed and available stations are
programmed in order of waveband reception
strength: RDS followed by FM. The last preset
automatically stored will then be played.
Manual programming
1
Tune to your desired station (see “Tuning to
radio stations”).
2
Press the control knob on the front panel
upward (corresponding to
PROGRAM
) or
PROG
on the remote to activate programming.
3
Press
PRESET -/+
on the top of the system or
¡
/
™
on the remote to allocate a number
from 1 to 20 to this station.
4
Press the control knob on the front panel
upward (corresponding to
PROGRAM
) or
PROG
on the remote again to confirm the
setting.
➜
The preset number and the frequency of the
preset station are shown.
pg001-025_MCM700_12-Eng
2007.3.14, 10:39
18
