24
English
Timer SLEEP
Setting the timer
The set can be used as an alarm clock, whereby
the selected source (CD, TUNER or USB) star ts
playback at a preset time.
Make sure the
clock is set before using the timer.
1
In standby mode, press and hold
TIMER
on the
remote control until
appears.
➜
flashes.
SELECT SOURCE
displays.
2
Press
SOURCE
on the set repeatedly to select
the source (or press
CD, TUNER
or
USB
on
the remote control).
3
Press
TIMER
to confirm.
➜
The hours digits start flashing.
4
Hold down or press
VOLUME
+/-
repeatedly
to set the hours.
5
Press
TIMER
to confirm.
➜
The minutes digits start flashing.
6
Hold down or press
VOLUME
+/-
repeatedly
to set the minutes.
7
Press
TIMER
to confirm.
➜
The timer is now set and activated.
➜
At the set alarm time, the CD, TUNER or
USB will switch on (volume level: max. 13).
Note:
– The set will exit from the timer setting mode if
no button is pressed within 90 seconds.
Activating and deactivating
TIMER
●
In standby mode, press and hold
TIMER ON/
OFF
on the remote once or more to activate
or deactivate the timer.
➜
Display shows if activated, and
disappears if deactivated.
Helpful hints:
The timer will not work at the set time if
- the set is switched on
- the timer is deactivated
The set will switch to Tuner source
automatically if :
- no CD is inserted when the selected source is CD;
- no USB device is connected when the selected
source is USB.
SLEEP
You can set a certain period of time after which
the set will switch off.
●
During playback, on the remote control, press
SLEEP
repeatedly to select the desired time
period options (in minutes):
➜
Display shows in sequence:
Sleep 15, 30,
45, 60, 75, 90, 00
.
➜
Display shows the selected option briefly and
returns to its previous status. The icon
appears.
To deactivate the sleep timer
, press
SLEEP
again.
➜
The icon
disappears.
or
Press
STANDBY-ON
to switch off the set (or
y
on the remote control).
Helpful hints:
–
The
SLEEP
function does not affect your alarm
time setting.
P001-P028_MCM279_55_Eng
11/27/07, 11:28
24
