20
English
Tuner
Tuning to radio stations
1
Press
SOURCE
once or more to select
TUNER
(or
TUNER
on the remote control).
2
Press
TUNER
on the remote control.
repeatedly to select your desired waveband, FM
or MW.
➜
Display shows:
, radio station frequency,
waveband and if programmed, a preset number.
3
Press and hold
4
/
¢
on the set (or
à
/
á
on the remote control ) until
SEARCH
appears.
➜
The radio automatically tunes to a station
with sufficient reception. Display shows
SEARCH
during automatic tuning.
➜
FM:
If a station is received in stereo,
is
shown.
4
Repeat step
3
if necessary until you find the
desired station.
●
To tune to a weak station, press
4
/
¢
on the set (or
à
/
á
on the remote control )
briefly and repeatedly until you have found
optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
(FM and MW) in the memory, manually or
automatically (Autostore).
Autostore: Automatic programming
Automatic programming will star t from preset 1
or a chosen preset number. From this preset
number upwards, former programmed tuner
stations will be erased. The set will only program
stations which are not in the memory already.
1
Press
ALBUM/ /-
on the set (or
3
/
4
on the remote control ) buttons once or
more to select the preset number where
programming should start.
Note:
–
If no tuner preset number is selected, default is
preset 1 and all your presets will be erased.
2
Press and hold
PROGRAM
until
AUTO
appears.
➜
Available stations (FM and MW) are
programmed.
➜
After all stations are stored, the first preset
station will then be played.
Manual programming
1
Tune to your desired station (see
Tuning to
radio stations
).
2
Press
PROGRAM
to activate programming.
➜
PROG
flashes.
3
Press
ALBUM/ /-
on the set (or
3
/
4
on the remote control ) to allocate a
number from 1 to 40 to this station.
4
Press
PROGRAM
to confirm.
➜
Display shows the preset number, waveband
and the frequency of the preset station.
5
Repeat steps 1-4 to store other stations.
●
You can erase a preset station by
storing another frequency in its place.
To listen to a preset station
●
Press
ALBUM/ /-
on the set (or
3
/
4
on the remote control ) buttons once or
more until the desired preset station is displayed.
Changing tuning grid
In some countries, the frequency step between
adjacent channels is 9 kHz (10 kHz in some
areas). The preset frequency step in the factory
is 10 kHz.
1
Select tuner mode.
2
Press and hold
9
for more than 2 seconds .
Note:
–
All preset stations will be lost and need to be
reprogrammed.
P001-P028_MCM279_55_Eng
11/27/07, 11:28
20
