12
Connect speakers
Note
Insert the stripped portion of each speaker
•
wire into the socket completely.
For optimal sound, use the supplied speakers
•
only.
Connect only speakers with impedance that is
•
the same or higher than the supplied speakers.
The
•
DEMO
jack is only applicable to the demo
unit that is not inlcuded in the apparatus. Do
not attempt to connect any other device to
the apparatus through this jack.
For the main unit side:
1
Unscrew the speaker connectors.
2
Insert fully the red end of a speaker cable
into the left red (+) connector.
3
Screw the left red (+) connector to
secure the cable.
4
Insert fully the silver end of a speaker
cable into the left black (-) connector.
5
Screw the left black (-) connector to
secure the cable.
6
Repeat steps 2-5 to insert the other
speaker cable into the right connectors.
3 Connect
Connect control cable
1
Connect the supplied control cable to the
CONTROL CABLE
jacks on the main
unit.
Preparations
1
Place the apparatus near to the TV.
2
Place the front left and right speakers
at equal distance from the TV and at an
angle of approximately 45 degrees from
the listening position.
Note
To avoid magnetic interference or unwanted
•
noise, never place this apparatus and speakers
too close to any radiation devices.
EN
