Philips MCD772, Руководство пользователя

Страница: 9 / 31

English
9
Connections
Using Component Video jacks (Y Pb Pr)
IMPORTANT!
– The progressive scan video quality is
only possible when using Y Pb Pr, and a
progressive scan TV is required.
1
2
1
Use component video cables (red/blue/green -
not supplied) to connect the DVD system's
COMPONENT (Pr/Cr Y Pb/Cb)
jacks to
the corresponding Component video input jacks
(or labeled as Y Pb/Cb Pr/Cr or YUV) on the TV.
2
To hear the TV channels through this DVD
system, use the audio cables (white/red) to
connect
AUX IN jacks to the corresponding
AUDIO OUT jacks on the TV.
3
If you are using a Progressive Scan TV (TV must
indicate Progressive Scan or ProScan capability),
to activate TV Progressive Scan, please refer to
your TV user manual. For DVD system
Progressive Scan function, see “Getting Started-
Setting up Progressive Scan feature”.
Note:
– If your TV does not support Progressive Scan,
you will not be able to view the picture.
Press SYSTEM MENU on the remote to exit the
system menu and then DISC and “1” to exit
progressive scan.
Using S-Video jack
IMPORTANT!
– If S-Video is used for DVD playback
connection, the system’s COMPONENT
setting will need to be changed
accordingly.
2
1
1
Use an S-Video cable (not supplied) to connect
the DVD system’s
S-VIDEO jack to the S-
Video input jack (or labeled as Y/C or S-VHS) on
the TV.
2
To hear the TV channels through this DVD
system, use the audio cables (white/red) to
connect
AUX IN
jacks to the corresponding
AUDIO OUT jacks on the TV.
Connecting to a TV with HDMI Jack
HDMI IN
HDMI IN
HDTV
●
Use a HDMI cable (not supplied) to connect the
HDMI jack on the DVD Player to HDMI IN
on a HDMI compatible device (e.g.; TV, Projector,
Adaptor).
➜
It may take a while for the DVD player and
input device to communicate and initialise.
➜
Playback starts automatically.
Notes:
– Proceed to "Setup Menu Options"
➜
"VIDEO
SETUP PAGE"
➜
"HDMI SETUP" for detailed
HDMI setup.
– If you are using the HDMI as audio source
make sure that "DIGITAL OUTPUT" is set to "PCM
only" (see "Setup Menu Options"
➜
"AUDIO
SETUP PAGE"
➜
"DIGITAL AUDIO SETUP").
pg 001-029_MCD772_9£ ≥ _Eng 2010.3.30, 9:26 9