Philips MCD288E, Руководство пользователя

Страница: 33 / 38

English
33
Clock/Timer
Clock setting
See "Preparations-Step 2: Setting the clock".
Timer setting
● The system can be used as an alarm clock,
whereby the last selected source is switched on
at a set time (one time operation). The clock
time needs to be set first before the timer can
be used.
1
In standby mode, press and hold
SLEEP/
TIMER
on the remote control for more than
three seconds.
➜ " TIMER SET " is displayed briefly. Then, the
hour digits flash on the display panel.
2
Press
VOLUME -/+
(
VOL +/-
on the remote
control) to set the hours and
SLEEP/TIMER
to confirm.
➜ The minute digits flash on the display panel.
3
Press
VOLUME -/+
(
VOL +/-
on the remote
control) to set the minutes and
SLEEP/TIMER
to confirm.
➜ " TUN ", “ DVD ” or " USB " flashes.
4
Press
VOLUME -/+
(
VOL +/-
on the remote
control) to select your desired source.
5
Press
SLEEP/TIMER
to complete the setting.
➜ Display shows .
To deactivate the timer
● Press
SLEEP/TIMER
again
.
➜ disappears.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1
Press
SLEEP/TIMER
on the remote control
repeatedly to select a preset time.
➜ The selections are as follows (time in
minutes):
OFF
™
15
™
30
™
45
™
60
™
75
™
90
™
105
™
120
™
OFF
➜ " SLEEP XX " or " SLEEP OFF " is displayed.
" XX " is the time in minutes.
2
When you reach the desired length of time, stop
pressing
SLEEP/TIMER
.
➜ Display shows .
To deactivate the sleep timer
● Press
SLEEP/TIMER
repeatedly until " OFF " is
displayed, or press
ECO POWER/
STANDBY-ON y
(
y
on the remote control).
➜
disappears.
pg025-pg037_MCD288E-12-Eng-B 2007.12.21, 17:22 33