English
7
Preparations
Rear connections
The type plate is located at the rear of the
system.
For users in the U.K.: please follow the
instructions on page 2.
A
Power
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
Warning!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it
(not available for all versions).
B
Connecting the control cable
Connect the serial port marked “
CONTROL
CABLE
” at the rear of the CD player to the
same port at the rear of the power amplifier
with the supplied flat control cable.
C
DAB/FM antenna Connection
1
Connect the supplied DAB/FM antenna to the
“
DAB/FM AERIAL
” port on the rear of the
CD player.
2
Fasten the nut on the connector of the antenna
to ensure firm connection.
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
Note:
– The pin on the connector of the antenna should
be in alignment with the hole in the “
DAB/FM
AERIAL
” port.
AC power cord
Speaker
(right)
Speaker
(left)
DAB/FM
antenna
pg001-021_MCB700_05
2006.10.25, 17:11
7
