Philips MCB2305, Руководство пользователя

Страница: 15 / 22

13
EN
Show DAB+ information
While listening to DAB+ radio, press
INFO/
RDS repeatedly to scroll through the following
information (if available):
• Station Name
• RDS TEXT message
• Dynamic Label Segment
• Program Type
• Ensemble Name
• Frequency
• Signal error rate
• Bit rate
• Audio status (DAB, DAB+)
• Time
• Date
Use DAB+ menu
In DAB+ mode, press MENU to access DAB+
menu.
1
Press / to scroll the menu options:
•
[Full scan]
(full scan): scan and store all
the available DAB+ radio stations.
•
[Manual]
(manual): tune to a DAB+
station manually.
•
[Prune]
(prune): remove all the invalid
stations from the station list.
•
[System]
(system): adjust system
settings.
2
To select an option, press OK .
3
If a sub-option is available, repeat steps
2- 3.
[System] (system)
• [Reset] (reset): reset all settings to factory
default.
• [UPGRADE] (upgrade): upgrade software
if available.
• [SW VER] (software version): show the
software version of this unit.
Note
•
If no button is pressed within 30 seconds, the menu
exits.
Listen to FM radio
Tune to a radio station
Tip
•
Position the antenna as far as possible from TV, VCR, or
other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.
1
Press
SOURCE
repeatedly to select the
FM radio source.
2
Press and hold / for more than two
seconds.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station:
Press / repeatedly until you find optimal
reception.
Store FM radio stations automatically
Note
•
You can program a maximum of 20 preset radio
stations (FM).
1
In tuner mode, press
MENU
to access FM
tuner menu.
»
[SEARCH LEVEL]
(search level) is
displayed.
2
Press OK , and then press / to scroll
the menu options:
• [Strong] (strong stations): scan stations
with strong signals only.
• [All] (all stations): scan all available FM
radio stations.
3
Press
OK
to confirm.
4
Press MENU to exit FM tuner menu.
5
In FM tuner mode, press and hold SCAN
to search.