Philips MCB2305, Руководство пользователя

Страница: 11 / 22

9
EN
Prepare the remote control
Caution
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
Power on
Press .
»
MCB2305 switches to the last selected
source.
Switch to standby mode
Press again to switch
MCB2305
to standby
mode.
» The clock (if set) is displayed on the panel.
• In standby mode, press to switch
between working mode and standby
mode.
Note
•
MCB2305 switches to Standby mode after 15 minutes
inactive.
Set the clock
1
In standby mode, press and hold CLOCK
for more than two seconds to enter the
clock setting mode.
»
[24 HOUR] (24 hour) or [12 HOUR]
(12 hour) is displayed.
2
Press / to select 24 or 12 hour
format, and then press CLOCK .
» The hour digits begin to blink.
3
Press / to set the hour, and then
press CLOCK .
» The minute digits begin to blink.
4
Press / to set the minute, and then
press CLOCK .
5
Press / to select [SYNC ON] or
[SYNC OFF]
, and then press
CLOCK
.
• [SYNC ON] : When you tune to an
RDS station that transmits time signals,
MCB2305 automatically synchronizes
time with the RDS station.
• [SYNC OFF] : Not synchronize the
clock automatically.
»
The set clock is displayed.
Note
•
To view clock information in working mode, press
CLOCK .
•
If no button is pressed in 90 seconds during setting,
MCB2305 exits clock setting without saving earlier
operations.