15
English
DAB Radio
Selecting a preset DAB station
1
Press
PRESET
+
+
+
+
+
/
-
-
-
-
-
(
3
/
4
on the remote
control ) to select desired preset station.
2
Press
2;
to confirm the selection.
Note
– If you have not yet stored a DAB station in one
of the presets, "Empty preset" will be displayed. The
display will revert to the previously selected station
after a few seconds.
Resetting to the factory setting
Resetting to the factory setting will delete all of
the preset stations.
1
In standby mode, on the main unit, press and
hold
MENU
and
PRESET
+
+
+
+
+
simultaneously.
2
Then press
9
to reset.
Changing the DAB station
information
On the display of DAB broadcasting, the first line
shows a station name, and the second line shows
the service information for the current station. 7
types of service information are available.
●
Press
INFO./RDS
repeatedly to cycle through
the display information.
Using the MENU control
The menu control lets you access the DAB radio
setup options.
1
In DAB mode, press
MENU
to enter the menu
options.
➜
The first setup option "Manual tune" is
displayed.
2
Press
4
/
¢
to scroll the menu options:
Manual tune -> Auto scan local -> Auto
scan full -> DRC value -> Sw version
3
To select an option, press
2;
.
4
Repeat steps
2-3
if sub-option is available under
one option.
Manual tune
By using this feature, it is possible to manually
tune to a specific channel/frequency. In addition
to antenna orienting for better radio reception,
the optimal reception can also be obtained by
using this feature.
1
In DAB mode, press
MENU
to display "Manual
tune" option.
2
Press
2;
to confirm the selection.
➜
Display shows a channel and its frequency.
3
Press
4
/
¢
repeatedly until desired
channel/frequency appears.
4
Press
2;
to confirm the selection.
●
You may press
INFO./RDS
to change the
service information on the display.
●
You may adjust the position of the antenna to
obtain the optimal signal strength.
Local scan and Full scan
Local scan is used to perform a small range of
DAB radio search (in UK). Full scan is used to
perform a wide range of DAB radio search
(outside UK).
1
In DAB mode, press
MENU
to enter the menu
options.
2
Press
4
/
¢
repeatedly until “
Auto scan
local
” or “
Auto scan full
“
is displayed.
3
Press
2;
to confirm the selection.
➜
The local or full scan starts.
MCB146_05_Eng_ASDA
4/2/10, 15:05
15
Содержание MCB146
Страница 3: ...3 PULLTO OPEN 0 9 7 8 1 3 4 2 5 6 1 2 3 4 5 6 8 9 0 7 9 ...
Страница 23: ......