19
English
3140 115 31971
Clock/Timer
Setting the clock
There are two possible methods for setting the
clock: manually or automatically by using RDS.
Automatic clock setting
(RDS versions
only)
1
Tune to a RDS station (see “Radio Reception”).
2
Press
CLOCK SET
for more than 2 seconds.
➜
SEARCH RDS TIME
is displayed for a
maximum of 90 seconds; the time is then
displayed.
➜
NO RDS TIME
is displayed if no time signal
has been received and you will have to set the
clock manually.
Manual clock setting
1
In standby, press
CLOCK SET
.
➜
The clock digits for the hours flash.
2
Turn
VOLUME
to set the hours: clockwise for
hours up; anti-clockwise for hours down.
3
Press
CLOCK SET
again.
➜
The clock digits for the minutes flash.
4
Turn
VOLUME
to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
5
Press
CLOCK SET
toº confirm the time.
Note:
– The backlight for clock display is dim in standby.
Setting the timer
●
The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
●
You can also use it to record a favourite tuner
programme at a set period (see “Recording
timer”)
●
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In any mode, press
TIMER ON•OFF
for more
than 2 seconds.
2
Turn
VOLUME
clockwise to select sound
source.
➜
Display sequence shows
CD
,
TUNER
,
TAPE
or
REC TUNER
.
3
Press
TIMER ON•OFF
to confirm your
desired mode.
➜
The selected source
CD
or
TUNER
TUNER
is shown. Display sequence scrolls
SET ON
TIME
and
TIMER
flashes. The clock digits for the
hours flash.
4
Turn
VOLUME
to set the hours: clockwise for
hours up; anti-clockwise for hours down.
5
Press
TIMER ON•OFF
again.
➜
The clock digits for the minutes flash.
6
Turn
VOLUME
to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
7
Press
TIMER ON•OFF
to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating
TIMER
●
In standby or during playback, press
TIMER ON•OFF
once.
➜
Display shows
TIMER
if activated, and
disappears if deactivated.