Philips MC-55, Руководство пользователя

Страница: 22 / 26

22
English
point 2
Clock/Timer
View clock
The clock (if it is set) will be shown in Standby
mode.
To view the clock in any source mode
(VCD or TUNER for example)
●
Press CLOCK .
➜
The clock will be displayed for a few seconds.
➜
If the clock has not been set, "
24 HOUR
" or
"
12 HOUR
" will start flashing.
Clock setting
The clock can be set in either 12- or 24-hour
mode, for example "
AM
12:00 " or " 00:00 ".
1
Press CLOCK to select clock mode.
2
Press PROGRAM to select clock setting mode.
➜
"
24 HOUR
" or "
12 HOUR
" will star t flashing.
3
Press
S
or
T
to select 12- and 24- hour
mode.
4
Press
PROGRAM
to confirm the selection.
➜
The hour indication will start flashing.
5
Press
S
or
T
to set the hours.
6
Press PROGRAM to confirm the selection.
➜
The minutes indication will start flashing.
7
Press
S
or
T
to set the minutes.
8
Press PROGRAM to store the setting
➜
The clock will start working.
●
To exit without storing the setting, press
Ç
on
the system.
Notes:
– The clock setting will be erased when the power
cord is disconnected or if a power failure occurred.
– During clock setting, if no button is pressed
within 5 seconds, the system will exit clock setting
mode automatically.
CLOCK
TIMER
ON/OFF
SET
OPEN/
CLOSE
STEREO/
VOCAL
OSD/DIM
iR SENSOR
SHUFFLE REV.MODE BAND
RECORD
PROGRAM
MIC
REPEAT• DEMO STOP•CLEAR SEARCH•TUNING
VOLUME
STANDBY
ON
M C - 5 5 V I D E O C D M I C R O S Y S T E M
DIGITAL SOUND
CONTROL
4 PRESET 3
DIRECTION PLAY•PAUSE
1
2 3
VCD TUNER TAPE
Timer setting
The system can switch on to VCD, TUNER or
TAPE mode automatically at a preset time,
serving as an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– The timer can only be activated from
Standby mode.
1
Press and hold TIMER ON/OFF (SET) on
the system or TIMER on the remote control for
more than 2 seconds to select timer setting
mode.
➜
TIMER
will appear on the display.
●
Press
S
or
T
repeatedly to view the
previous setting.
2
Press PROGRAM to change the previous
setting or start a new setting.
➜
"
TUNER
", "
TAPE
", "
CD
" or "
REC TU
" will start
flashing.
3
Press
S
or
T
to select the desired source.
4
Press
PROGRAM
to confirm the selection.
●
If "
TUNER
" or "
REC TU
" is selected, press
TUNER to select the current radio station or
press
S
or
T
to select a desired preset
radio station and press PROGRAM to confirm
the selection.
➜
"
VOL
" and the volume level will start flashing.
5
Press
S
or
T
to set the volume level.
6
Press
PROGRAM
to confirm the setting.
➜
ON
and the hour indication will start flashing.
7
Set the time to start playback.
Press
S
or
T
to set timer start hours and
press PROGRAM to store the setting and
repeat the same procedure to set the minutes.
➜
OFF
and the hour indication will start flashing.
8
Set the time to stop playback following the
above procedure.
➜
"
TIMER OK
" will be display briefly and the
timer is now set.
9
Switch the system to standby mode.
●
When reached the preset timer, the selected
source will play if the timer has been activated.
pg 001-026/MC55/21-Eng 6/8/01, 1:41 PM 22