Philips MC-55, Руководство пользователя

Страница: 12 / 26

12
English
point 2
Basic Functions
CLOCK
TIMER
ON/OFF
SET
OPEN/
CLOSE
STEREO/
VOCAL
OSD/DIM
iR SENSOR
SHUFFLE REV.MODE BAND
RECORD
PROGRAM
MIC
REPEAT• DEMO STOP•CLEAR SEARCH•TUNING
VOLUME
STANDBY
ON
M C - 5 5 V I D E O C D M I C R O S Y S T E M
DIGITAL SOUND
CONTROL
4
PRESET
3
DIRECTION PLAY•PAUSE
1
2
3
VCD TUNER TAPE
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system.
To activate the demonstration
●
In Standby mode , press
REPEAT•DEMO
on
the system or REPEAT on the remote control.
➜
"
DEMO ON
" will be displayed.
➜
The demonstration will begin.
To deactivate the demonstration
●
Press REPEAT•DEMO again or STANDBY
ON
.
➜
"
DEMO OFF
" will be displayed.
➜
The system will switch to Standby mode.
Switching the system on
●
Press STANDBY ON or CD / TUNER /
TAPE .
➜
The system will switch to the last selected
source or the selected source.
Note:
– If the demonstration mode is active, it is not
possible to switch on the system, “
DEMO ON
” will
be displayed.
Switching the system to Standby
mode
●
Press
STANDBY ON
.
➜
"
BYE BYE
" will scroll through briefly and the
clock will be displayed.
Volume control
●
Press VOLUME
3
to increase or VOLUME
4
to decrease the volume level.
➜
"
VOL XX
" will be displayed. “
XX
” denotes
the volume level.
To switch off the volume temporarily
●
Press
MUTE
on the remote control.
➜
Playback will continue without sound and
"
MUTE
" will be displayed.
●
To restore the volume, press MUTE again or
increase the VOLUME level.
Sound control
Digital Sound Control (DSC)
The Digital Sound Control (DSC) feature
enables you to enjoy special sound effects that
have preset equaliser settings, providing the best
music reproduction.
●
Press DIGITAL SOUND CONTROL
(DSC) to select the desired sound effect : POP,
CLASSIC, ROCK, JAZZ or FLAT.
To switch the BASS on/off
●
Press and hold
DIGITAL SOUND
CONTROL (DSC)
until "
BBS ON
" or "
BBS
OFF
" is displayed.
➜
If BASS is switched on,
BASS
will appear on
the display
Dim mode
You can select the desired brightness for the
display.
●
Press and hold OSD/DIM to select DIM HIGH,
DIM LOW or LED OFF.
➜
"
DIM HIGH
", "
DIM LOW
" or "
LED OFF
" will
be displayed.
pg 001-026/MC55/21-Eng 6/8/01, 1:41 PM 12