MCP Key (continued)
To Clear The MCP Key:
1.
On the remote control,press and
hold
SET
until the red light
blinks twice, then release
SET
.
2.
Enter
9-9-5
. The red light will
blink twice.
3.
Press
MCP
once.
4.
Press and hold
SET
until the red
light blinks twice, then release
SET
.
FC1 And FC2 Keys
The
FC1
and
FC2
keys can be setup to per-
form a number of functions with a single
key press once the selection is programmed.
Repetitive, time-consuming operations can
be grouped for easy, convenient access
through the press of one key.
The
FC
keys are ideal for home theater oper-
ations, setting a favorite channel, adding to
multiple component uses, guide steps or
other multiple functions you would like to
control with one key press. On one key, you
can define and program a sequence of events.
Moreover, each
FC
key can hold up to 15 key
presses, allowing optimal individual cus-
tomization. Below are a few examples to get
you started.
Programming A Favorite Channel
With so many channels available through
your cable system or satellite provider, a
favorite channel can be programmed for easy,
direct channel selection with one key press.
For example, let’s assume your favorite pro-
grams are on channel 71. Use the following
instructions to program the
FC1
or
FC2
key
for this channel:
1.
On the remote control, press and
hold
SET
until the red light blinks
twice, then release
SET
.
2.
Enter
9-9-5
. The red light will
blink twice.
3.
Press and release either
FC1
or
FC2
.
4.
On the remote con-
trol, press
TV
,
VCR
,
CBL
, or
DSS
once.
5.
Enter
7-1
.
NOTE: If you have access to over
100 channels, enter in 071.
6.
Press and hold
SET
until the red
light blinks twice, then release
SET
.
Programming A Secondary MCP Key With
Instant Channel Selection
Just like the
MCP
key, the
FC1
and
FC2
keys
can be programmed to turn on and off your
equipment. For instance, let’s say you want
your child to be able to easily turn on the
equipment and select their favorite channel.
You can setup a sequence on the
FC1
or
FC2
key to turn on the TV and cable box, and
then tune the cable box to a specific channel
(e.g., 11) with the push of one key.
1.
On the remote control,press and
hold
SET
until the red light
blinks twice, then release
SET
.
2.
Enter
9-9-5
. The red light will
blink twice.
3.
Press and release either
FC1
or
FC2
.
4.
Enter the following sequence:
CBL
,
POWER
,
TV
,
POWER
,
CBL
, and
1-1
(or
0-1-1
if you have access
to over 100 channels)
5.
Press and hold
SET
until the red
light blinks twice, then release
SET
.
Now when you press the programmed
FC
key, the Cable box and TV will turn on and
the Cable box will tune to channel 11.
9
OPERATING YOUR REMOTE CONTROL
REM380 Manual Engl 12/28/99 12:10 PM Page 9
