10 EN
6 Adjust sound
7 Other features
The following operations are applicable to all
supported media.
Select a preset sound effect
• Press
SOUND
repeatedly to select a preset sound
effect.
Adjust volume level
• On the remote control, press / (volume)
repeatedly.
Mute sound
• Press to mute or unmute the sound.
Set the alarm timer
This product can be used as an alarm clock.
Note
• Alarm timer is not available in
AUDIO IN
mode.
1. Make sure that you have set the clock.
2. In standby, press and hold for more than 2
seconds.
- The hour digits blink.
3.Press / repeatedly to set the hour, and then
press to confirm.
- The minute digits blink.
4. Press / to set the minute, and then press
to confirm.
- The last selected alarm source blinks.
5. Press / to select an alarm source (FM or
DAB+ radio, BT, Buzzer), and then press to
confirm.
- XX blinks (XX indicates the volume level of alarm).
6. Press / to set the alarm volume, and then
press to confirm.
Activate/deactivate alarm timer
In standby mode, press repeatedly to activate or
deactivate timer.
- If timer is activated,
TIMER
is displayed.
• In standby, you may press and hold to toggle
clock display on or off.
Set the sleep timer
This music system can switch to standby automati-
cally after a set period of time.
• When the music system is turned on, press
repeatedly to select a set period of time (in
minutes).
- When sleep timer is activated, is displayed.
To deactivate sleep timer
• Press repeatedly until (sleep off) is displayed.
- When sleep timer is deactivated, disappears.
Listen to an external device
You can listen to an external device through this
unit with an MP3 link cable.
1. Connect an MP3 link cable (not supplied)
between:
•
AUX IN
jack (3.5 mm) on the product,
• and the headphone jack on an external device.
2. Press
AUX IN
repeatedly to select AUDIO IN
source.
3. Start to play the device (see the device user
manual).
