EN 9
2. Press and hold
[SCAN/OK]
for more than 2
seconds.
- The product scans and stores all DAB+ radio
stations automatically.
Select a DAB+ radio station
After DAB+ radio stations are scanned and stored,
press / to select a DAB+ station.
Store DAB+ radio stations manually
1. Press
DAB/FM
to select a DAB+ radio station.
2. Press
[PRESET]
to activate program mode.
3. Press / to allocate a number from 1–20 to
this radio station, and then press
[PRESET]
to
4. Repeat steps 1-3 to program more stations.
To select a preset DAB+ radio station: In DAB+
mode, press / .
DAB+ menu Selection and Information Display
1. In DAB+ mode, press
MENU / INFO
to access
DAB+ menu.
2. Press / to toggle the menu options.
[SCAN]:
Scan and store all available DAB+ radio
stations.
[MANUAL]:
Tune to a DAB+ station manually.
[PRUNE]:
Remove invalid stations from the station
list.
[SYSTEM]:
Adjust system settings.
3 .To select an option, press
SCAN / OK
4. If a sub-option is available, repeat steps 2-3.
• To exit the menu, press
MENU / INFO
again.
Under
[SYSTEM]
(system) menu
•
[RESET]
(reset): reset all settings to factory default.
•
[SW VER]
(software version): show the software
version of this product.
Display DAB+ information
While listening to DAB+ radio, press
MENU / INFO
repeatedly to display various information (if
available), such as frequency, signal strength,
time, etc.
Listen to FM radio
Tune to an FM radio station
1
.
Press
DAB/FM
to select a FM radio station
2. Press and hold
/
or more than 2 seconds.
- The radio tunes to a station with strong reception
automatically.
3. Repeat step 2 to tune to more stations.
To tune to a weak station: Press / repeatedly until
Store FM radio stations Automatically
Note
• You can store a maximum of 20 FM radio stations.
1. Press
DAB/FM
repeatedly to select FM source.
2. Press and hold
SCAN/OK
for more than 2 seconds.
- All available stations are programmed in the order of
waveband reception strength.
automatically.
Store FM radio stations manually
1. Tune to an FM radio station.
2.Press
SCAN/OK
to activate program mode.
-
[P01]
is displayed.
3. Press / to allocate a number from 1–20 to this
radio station, and then press
SCAN/OK
4. Repeat steps 1-3 to program more stations.
Note
• To overwrite a programmed station, store another station
in its place.
Select a preset FM radio station
In FM mode, press / to select a preset number.
• While listening to FM radio, you may press
SCAN/OK
to
toggle stereo and mono sound.
Display RDS information
RDS (Radio Data System) is a service that allows FM
stations to show additional information.
1. Tune to an FM radio station.
2. Press
MENU/INFO
repeatedly to display various RDS
information (if available), such as station name, program
type, time, etc.
