3-1
DISASSEMBLY INSTRUCTIONS
1) Loosen 9 screws and remove the Top Cover by lifting the rear portion upwards before sliding it out
towards the rear.
- 5 screws on the back
- 2 screws each on the left & right side
2) Loosen 7 screws & lift up the top edge of Front Panel assembly to free some catches before sliding
it out towards the front.
- 4 screws on the bottom
- 1 screw "A" on the inside as indicated in Figure 1.
- 1 screw each on the left & right side
3-1
Dismantling of the PowerBoard
1) Loosen 4 screws "d" on the top of power board as shown in figure 3.
D
C
Figure 1
Dismantling of the Main Board
1) Loosen 6 screws "B" on the top of main board as shown in figure1.
2) Loosen 9 screws "C" at the back panel as shown in figure 2.
Figure 2
Figure 2
B
A
Содержание LX700/21S/22S/25S
