Philips LD427SSX, Руководство по обслуживанию

Страница: 16 / 148

5-2 FL9.5-1DC
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Reference Notes
1. The BD Main CBA & BD Mechanism Assembly
is adjusted as a unit at factory. Therefore, do
not disassemble it. Replace the BD Main CBA
& BD Mechanism Assembly as a unit.
[17] PCB Holder D4 4(S-23) ---
[18]
BD Loader
Bracket
D4 6(S-24), 2(S-25) ---
[19]
AC Inlet
Holder
D4 2(S-26) ---
[20]
Speaker
Box(es) [B]
D4 4(S-27), 10(S-28) ---
[21] Speaker(s) D4 Speaker Box(es) [F] ---
[22]
Stand
Bracket
D4
2(S-29), 2(S-30),
4(S-31), 2(S-32)
---
[23]
LCD
Module
Assembly
D5 6(S-33) ---
[24]
Junction
CBA D5
D6
Desolder ---
[25]
Function
CBA D5
D6
*WH1301B ---
[26]
IR Sensor
CBA D5
D6
--------------- ---
[27]
Front
Cabinet
D5 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Unclamp/
Desolder
Note