
Alignments
EN 60
LC4.5E AA
8.
8.2.4
Grey Scale Adjustment
SDTV Grey Scale Adjustment
Equipment and Setting
•
E.g. Fluke 54200 or Philips PM5580.
•
100% “8-step grey scale” pattern.
Alignment Method
•
Switch the TV set with the RC to TV mode,
•
Press the MUTE button on the RC,
•
Set SMART PICTURE to SOFT mode,
•
Activate the auto colour function by pressing key-
sequence: INFO - MUTE - MUTE - MUTE - INFO - MENU
- INFO.
Expected Results
•
Visual check if the 8 Grey levels are correct.
Analog PC Grey Scale Adjustment
Equipment and Setting
•
Quantum Data 802B.
•
PC input signal, with 64 levels Grey scale pattern,
1024x768 @ 60 Hz (Format= 81:DMT1060, Pattern=
123:Grey 64).
•
PC input at D-sub VGA connector.
Alignment Method
•
Switch the TV set with the RC to PC mode.
•
Press the MUTE button on the RC.
•
Set BRIGHTNESS and CONTRAST to nominal “50”.
•
Activate the auto colour function by pressing key-
sequence: INFO - MUTE - MUTE - MUTE - INFO - MENU
- INFO.
Expected Results
•
Visual check if the 64 Grey levels are correct.
HD Grey Scale Adjustment
Equipment and Setting
•
Quantum Data 802B.
•
HD input signal, Top half 100% colour bar and bottom half
Grey scale pattern, 1920x1080i @ 60 Hz YPbPr (Format=
1080i30, Pattern= HDBar100).
•
HD input at D-sub VGA connector.
Alignment Method
•
Switch the TV set with the RC to HD mode.
•
Press the MUTE button on the RC.
•
Activate the auto colour function by pressing key-
sequence: INFO - MUTE - MUTE - MUTE - INFO - MENU
- INFO.
Expected Results
•
Visual check if Colour bar tint and Grey scale are correct.
8.2.5
Sound
No adjustments are needed for the sound.
8.3
Option Settings
Options are used to control the presence/absence of certain
features and hardware.
See, for an overview, the table on the next page.
8.3.1
How to Change an Option Byte
An Option Byte represents a number of different options.
Changing these bytes directly makes it possible to set all
options very fast. All options are controlled via seven option
bytes. Select the option byte (OP1.. OP7) with the cursor UP/
DOWN keys, and enter the new value.
Leaving the OPTION sub menu saves the changes in the
Option Byte settings. Some changes will only take effect after
the set has been switched “off” and “on” with the AC power
switch (cold start).