Philips LBB 1330, Инструкция по эксплуатации

Страница: 55 / 140

4. OPERATING AND PROGRAMMING THE SM40 SYSTEM
4-33
4
Status / Action
Using the ‘Enter’ key:
Press ‘ Enter ’:
Press ‘ Enter ’:
Using the ‘Call Station’ key:
Press and hold the ‘Call Station’ key.
Release the ‘Call Station’ key.
Using the microphone:
When re-recording a previously recorded
message the display shows:
When, using any of the methods above, the
available recording time has been used, the
display shows:
Result / Remarks
Recording can be controlled in the following three ways:
1. Using the ‘Enter’ key,
2. Using the ‘Call Station’ key connected to the Digital Message Card,
3. Using the ‘On/Off ’ switch of the microphone connected to the Digital Message
Card (if jumper X102 on the DMC is in position 1-2).
Recording begins and the time bar decreases.
Recording stops, and another message can be recorded.
Recording begins and the time bar decreases.
Recording stops, and another message can be recorded.
Recording using the microphones switch is identical to recording using the ‘Call
Station’ key.
Note: Re-recording can not be stopped. Recording automatically stops at the end of
the original recorded messages time.
DMC: XX SELECT MESSAGE TO RECORD:_
AVAILABLE TIME USED; RECORDING STOPPED
TIME: - - - - - - - - - - - - - - - - -
(RE-)RECORDING MESSAGE: X
DMC: 02 SELECT MESSAGE TO RECORD:_
PRESS 'C' TO ERASE ALL MESSAGES
TIME: - - - - - - - - - - - - - - - - -
RELEASE KEY TO STOP RECORDING
DMC: XX SELECT MESSAGE TO RECORD:_
PRESS 'C' TO ERASE ALL MESSAGES
TIME: - - - - - - - - - - - - - - - - -
PRESS 'ENTER' TO STOP RECORDING