LFF6050
- 33 -
6 - Parameters/Setup
252 - SETUP / TEL. NETWORK / PREFIX
1
Press , enter
252
using the keypad.
2
Enter the required minimal
SIZE NUMBER
of the
company’s outside numbers and confirm with
OK
.
The minimal size will range between 1 and 30.
3
Enter the required outgoing local
PREFIX
of the
company’s telephone network (maximum 10
characters) and confirm with
OK
.
4
To exit this menu, press
.
Transmission report
You may print a
transmission report
for all
communications over the telephone network (PSTN).
You may choose between more than one criteria for
printing reports:
•
ON
: a report is given when the transmission was
properly performed or when it is completely
abandoned (but there is only one report per request),
•
OFF
: no transmission report, however, your fax will
note all transmissions that took place in its log,
•
ALWAYS
: a report is printed with each transmission,
•
ON ERROR
: a report is printed only if the transmission
failed or is abandoned.
With each transmission report from memory, a reduced
version of the first page is automatically reproduced.
To select the report type:
231 - SETUP / SEND / SEND REPORT
1
Press , enter
231
using the keypad.
2
Select the required option
ON
,
OFF
,
ALWAYS
or
ON ERROR
and confirm your choice with
OK
.
3
To exit this menu, press
.
Document feed type
You may choose the way you want to feed your
documents:
• from
memory
, transmission will take place only after
memory storage of the document and dialling.
It allows you to get your originals back quickly to free
up the machine.
• from the
feeder
of the sheet-feed scanner,
transmission will occur after dialling and paper
scanning. It allows transmission of larger documents.
To select the way you want to feed your documents:
232 - SETUP / SEND / MEMORY SEND.
1
Press , enter
232
using the keypad.
2
Select the option
MEMORY
or
FEEDER
and
confirm your choice with
OK
.
In feeder mode, reduced images will not appear on
the transmission report.
3
To exit this menu, press
.
Economy period
This function allows you to defer a fax transmission to "off-
peak hours" and thus reduce the cost of your
communications.
The
economy period
, via the telephone network (at off-
peak hours), is preset by default from 7.00 pm to 7.30 am.
Nevertheless you may change this time slot.
To modify the economy period:
233 - SETUP / SEND / ECO PER.
1
Press , enter
233
using the keypad.
2
Enter the hours of the new economy period (for
example 19:00-07:30) and confirm your choice
with
OK
.
3
To exit this menu, press
.
To use the economy period:
32 - FAX / ECO TRANS.
1
Select
32 - FAX / ECO TRANS
.
2
Enter the call number and confirm with
OK
.
3
Adjust the contrast and confirm with
OK
.
4
Select the feed type,
FEEDER
or
MEMORY
and
confirm with
OK
.
5
You may enter the number of pages before
transmission and confirm with
OK
.
6
If you are using the flatbed scanner, you can scan
more than one page. Place the next page on the
scanner, select
NEXT
and confirm with
OK
. Select
DONE
when all pages have been scanned.
Important
If you define a local prefix, do not
add it to the numbers stored in
the directory, it will be
automatically dialled with each
number.
Note
To insert a pause for dial tone ("/" sign),
press simultaneously the
C
TRL
and
M
keys, or long press the 0 (zero) key on
the numerical keypad until the "/" sign
is displayed.
Содержание LaserMFD 253118301-A
Страница 1: ...LFF 6050 GB User Manual ...
