10
Direction for use
38
L7.3A
10
Direction for use
7
The TV’s controls
For 25PT models
1. Mains power
Switch on or off the TV.
2. Red light indicator
When light is on, it indicates that the TV is on
standby. Note :If no signal is detected by the
TV after 10 minutes, it will switch to standby
automatically.
3. Remote control sensor
For the remote control to work, it must be
activated within the operating range of this
sensor.
4. Headphone socket
For connection of headphones.
5. Volume adjustment
To adjust volume level. Press these 2 keys
simultaneously will call up the 1st level
menu. Press these 2 keys again will exit
menu. Works as cursor left (VOLUME
L
) or
right (VOLUME
K
) in a menu.
6. Channel selection
To select a lower or higher channel number.
Works as cursor up (CHANNEL
6
) or down
(CHANNEL
7
) in a menu.
For 29PT models
n
VOLUME
L
K
˙
˝
˚
¸
CHANNEL
˚
¸
3
1
2
3
4
5
6
n
VOLUME
L
K
4
˙
˝
˚
¸
CHANNEL
˚
¸
3
1
2
3
4
5
6
5
Connecting peripheral equipment
Equipment such as VCR, Laser disc player, VCD etc. could be connected to
the video and audio (AV) sockets at the back of the TV. Switch off the TV
and equipment before making any connection.
Connection for playback
VCR
VCD
1.
Connect to AV sockets
•
connect the corresponding sockets of
the equipment to that of the TV.
•
to view the playback, select a channel
named AV1 (if connection is made to
sockets at VIDEO 1 in) or AV2 (if
connection is made to sockets at
VIDEO 2 in).
Note : If you have connected a computer
game set to VIDEO 1 in, select a channel
named GAME1 to playback. If your
connection is made to VIDEO 2 in, then
select GAME2 to playback.
2.
Connect to aerial socket
(only for VCR)
The playback on your VCR is considered a
TV channel by your TV if you connect via
the aerial socket. You must tune in to
your VCR’s test signal and assign the
channel number 0 to it. Refer to your
VCR’s instruction manual for more
details.
•
connect the RF cable to the VCR’s “RF
in” and connect the “RF out” of the VCR
to the aerial socket of the TV.
•
select channel 0 and tune in to to your
VCR’s signal.
•
to view the playback, select channel 0.
VCR
Laser disc
player
VIDEO 2
in
MONITOR
out
VIDEO 1
in
AUDIO
VIDEO
L
R
OR
g
Ω
75
VIDEO 2
in
MONITOR
out
VIDEO 1
in
AUDIO
VIDEO
L
R
OR
