Philips Kala, Руководство пользователя, Страница: 6 / 15

DESCRIPTION
TELEPHONE LEDS
The base station has a red/green LED.
Green LED
- Lit, when the base station is powered.
- Blinking, when:
. receiving a call
. the line is connected or the answering machine is replying.
- Unlit, when the base station is not connected to the power supply.
Red LED
- Lit, when the answering machine is ready to receive calls (ON).
- Blinking slowly, indicating the number of messages received (up to 3).
- Blinking rapidly, your answering machine is full.
AUDIBLE SIGNALS
Your telephone emits:
- 1 short beep = when you press a key.
- 1 long beep = when there is no contact between the handset an the base station or
any other problem occurs (if you make a mistake).
= to indicate that the handset needs to be recharged.
- 2 beeps = when you place the handset on the base station.
= confirming the programming you have entered.
- 3 beeps = in the programming phase, inviting you to continue with the
procedure.
Your answering machine emits:
- 1 long beep = inviting the caller to record a message.
= no messages have been recorded.
= no Outgoing Message when you switch your answering machine ON
= memory full when you attempt record a memo or switch your
answering machine ON.
- 2 beeps = indicating that all the messages have been read.
- 3 beeps = inviting the user to record a memo or an announcement locally.
- 1 beep = inviting you to dial the remote playback code.
RINGER EQUIVALENCE NUMBER OR REN (UK ONLY)
Your has a Ringer Equivalence Number (REN) of 1.0. To determine the maximum
number of telephones that can be connected to your line, add together the individual RENs of all
the apparatus you wish to connect. If this total exceeds four, one or all of your telephones may
not ring correctly.
5
ang6523.qxd 31/05/99 15:20 Page 5