Philips Kala, Руководство пользователя, Страница: 4 / 15

INSTALLING YOUR TELEPHONE
CHOOSING THE POSITION FOR THE BASE STATION
To reduce any risks of interference, avoid placing the base station less than 1 metre from another
electrical device (telephone, television, computer, etc.). The base station must be placed on a flat
surface.
Avoid placing the base station:
- in a damp room,
- near a heat source,
- near obstacles like thick walls or metal structures.
INSERTING / REPLACING THE BATTERIES
Your handset is powered by 2 rechargeable AA/R6
batteries. If you need to replace them you should use
PHILIPS RC NC-P or Saft RC6 batteries.
1 ð Press the top of the battery cover and slide it
downwards.
2 ð Insert the batteries, taking care to respect the
marked polarities.
3 ð Close the cover.
The batteries contain cadmium and should be disposed of in accordance with
the regulations in force concerning the disposal of waste.
Never use non-rechargeable batteries. The manufacturer disclaims all
responsibility if these recommendations are not respected.
CONNECTING THE TELEPHONE
At the back of the base station:
1 ð Connect the mains adapter cable to the base station, then plug
the mains adapter into the wall socket.
2 ð Connect the telephone cable to the base station and then to the
wall socket.
ð Place the telephone handset on the base station and allow the
batteries to charge for at least 12 hours .
Only use the cables supplied with the product.
FITTING THE COLOUR CLIP
1 ð Insert the clip from the top first.
2 ð Firmly press on the clips (in the arrow direction) until they
lock.
3 ð To remove the colour clip, pull it out from the “Philips “
marking.
3
1
2
Cd
ang6523.qxd 31/05/99 15:20 Page 3