iColor Keypad Product Guide
7
Inspect the Keypad and Accessories
Carefully inspect the box containing iColor Keypad and the contents for any damage
that may have occurred in transit.
Mount and Connect the Keypad
Make sure the power is OFF before mounting and connecting iColor Keypad.
1. A UL-listed low-voltage junction box for Class II equipment may be used in North
America. The provided junction box is for use outside of North America.
• Snap out a knock-out on a side that will not be mounted to the structural
component.
• Mount the junction box using hardware appropriate for the mounting surface,
2. Thread CAT 5e or better data cable through the knock-out in the junction box.
3. Insert the RJ45 connector into the port on the back of the keypad. When the
keypad is active, two indicator lamps indicate Ethernet link (green) and Ethernet
activity (yellow).
Ethernet Cont
roller Keypad
Designed in the USA,
Made in China.
Included in the box
iColor Keypad
Software CD
Standard single-gang wall box for use outside of
North America
(2) self-threading flat head countersunk M2.5 screws
Decora-style faceplate
Installation Instructions
OFF
