iColor Flex LMX gen2 Product Guide
15
Mounting iColor Flex LMX gen2 Strands Directly to a Mounting Surface
1. Using a pencil or chalk line, mark a center-line path for the nodes to follow.
2. Fasten iColor Flex LMX gen2 strands to the mounting surface using a suitable
mounting method. For example, you can mount strands to a pipe or cable using
plastic cable ties.
Mounting iColor Flex LMX gen2 Strands Using Mounting Track
1. Cut mounting track to the desired length with a saw or snips.
2. Using fl athead screws suitable for the mounting surface, drive screws through the
plastic track into the attaching surface. Recommended maximum spacing between
screws is 406 mm (16 in).
3. Snap the iColor Flex LMX gen2 nodes into the mounting track.
3. If using strands with standard 4-in or 12-in on-center spacing, snap optional
spacers into the track to hide mounting hardware and wires.
Do not twist or loop cable
Do not overstretch cable
Do not pull cable away from node
C
≤ 0 ºC
Use caution when handling cable
in sub-freezing temperatures
