Philips HX7251/69, Руководство пользователя

Страница: 8 / 60

Features
Easy-start
This Sonicare model comes with the Easy-start feature activated, which
helps you get used to brushing with the Sonicare.
The brushing power gently increases to full power over the first 14
brushings.
The Easy-start feature is active if you hear 2 beeps immediately after
you switch on the Sonicare. Once the Sonicare has reached optimal
brushing power (after the 14th brushing), you no longer hear the 2
beeps at the beginning of each brushing cycle.
Note: Each of the first 14 brushings must be at least 1 minute long to move
properly through the Easy-start ramp-up cycle.
Note: While the Easy-start feature is activated, the Dual Speed feature
(Gentle and Max speed modes) does not function. To use the Dual Speed
feature immediately, deactivate the Easy-start feature.
Deactivating or activating the Easy-start feature
1 Attach the brush head to the handle.
Place the handle in the plugged-in charger.
3 To deactivate the Easy-start feature, press and hold the on/off button
for 5 seconds. You hear 1 beep to indicate that the Easy-start feature
has been deactivated.
4 To activate the Easy-start feature, press and hold the on/off button
for 5 seconds. You hear 2 beeps to indicate that the Easy-start
feature has been activated.
Use of the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces the effectiveness of the Sonicare toothbrush
in removing plaque.
Make sure the Easy-start feature is deactivated and the handle fully
charged when the Sonicare is used in clinical trials.
Smartimer
This Sonicare model comes with the Smartimer feature, which
automatically sets the brushing time to the 2 minutes that dentists and
dental hygienists recommend.
After 2 minutes, the Smartimer automatically switches off the
toothbrush.
If you want to stop brushing briefly during a 2-minute brushing cycle,
press the on/off button. When you press the on/off button again, the
Smartimer resumes the brushing cycle at the point where you stopped.
The Smartimer automatically resets to the beginning of a 2-minute
cycle if:
you stop brushing for 30 seconds or longer;
you put the handle in the charger.
-
-
-
-
-
-
-
-
-
EngliSh
8