7
EN
E
ngl
ish
Preparing for
humidification
1
Pull out the water tank (fig.
h
).
2
Pull out the water tray (fig.
i
).
3
Remove all packaging material
of the NanoCloud rotary
humidification wick (fig.
j
).
Note
•
The humidification wick has been
assembled on the wick wheel upon
purchase.
4
Place the wick wheel on the wick
support (fig.
k
).
Note
•
When placing the wick wheel on the
wick support, make sure that the
projections on the wick wheel falls
into the corresponding grooves.
5
Place the water tray back into the
appliance (fig.
l
).
6
Turn the top cap of the water
tank anti-clockwise to unscrew it
(fig.
m
).
7
Fill the water tank with cold tap
water (fig.
n
).
8
Turn the top cap clockwise to tightly
lock it onto the water tank (fig.
o
).
9
Place the water tank back into the
appliance (fig.
p
).
4 Use the
appliance
Switching on and off
1
Put the plug in the power socket.
»
The appliance sounds. For
HU5931
, all lights go on once
and then go out again.
2
Touch
to switch on the
appliance (fig.
q
).
»
The appliance operates under
the auto fan speed by default,
and the default humidity
setting is "
".
»
The current humidity level will
display on the screen.
3
Touch and hold
for 3 seconds
to switch off the appliance
(fig.
r
&
s
).
Note
•
After the appliance is switched
off by the on/off button
, if the
plug is still in the power socket, the
appliance will operate under the
previous settings when it is switched
on again.
Tip
•
Touch the light on/off button to
turn on or off the indicator lights
and display screen.
•
Touch the temperature button
once and the current temperature
will display on the screen for
3 seconds. After that the current
humidity level will display (fig.
t
).
