11
EN
E
ngl
ish
Note
•
Make sure that the pre-filter is
completely dry. If it is still wet,
bacteria may multiply in it and
shorten the lifetime of the pre-filter.
5
After the pre-filter is completely dry,
place it back into the back panel
(fig.
‚
).
6
Touch and hold the reset button
for 3 seconds to reset the pre-filter
cleaning time (fig.
ƒ
).
Descaling the
NanoCloud rotary
humidification wick
Filter alert light
status
Follow this
Cleaning light
goes on (fig.
)
Descale the
NanoCloud
rotary
humidification
wick
1
Pull out the water tank (fig.
h
).
2
Pull out the water tray (fig.
}
).
3
Take the wick wheel off the wick
support (fig.
~
).
4
Mix the white vinegar with an equal
amount of tap water in a container
that is large enough to soak the
NanoCloud rotary humidification
wick in.
Note
•
White vinegar has 5% acetic acid.
•
If there are white deposits
(limescale) on the filter, make sure
that the side with the white deposits
is immersed in the water.
•
Do not take the NanoCloud rotary
humidification wick off the wheel
during descaling.
5
Let the NanoCloud rotary
humidification wick soak in the
solution for one hour (fig.
„
).
6
Rinse the NanoCloud rotary
humidification wick under the tap to
rinse away vinegar residues. During
rinsing, turn the wick so that both
front and back are rinsed (fig.
…
).
7
Air dry the NanoCloud rotary
humidification wick.
Note
•
Do not put the NanoCloud rotary
humidification wick under direct
sunlight.
8
Touch and hold the reset button
for 3 seconds to reset the
NanoCloud rotary humidification
wick cleaning time (fig.
ƒ
).
