Philips HTS6583, Руководство пользователя

Страница: 30 / 43

28 EN
Update software through USB
What you need
•
A USB flash drive that is FAT or NTFS-
formatted, with at least 75MB of memory. Do
not use a USB hard drive.
•
A computer with Internet access.
•
An archive utility that supports the ZIP file
format.
Step 1: Download the latest software
1
Connect a USB flash drive to your computer.
2
In your web browser, go to www.philips.com/
support.
3
At the Philips Support website, find your
product and locate the Software and drivers .
»
The software update is available as a zip file.
4
Save the zip file in the root directory of your
USB flash drive.
5
Use the archive utility to extract the software
update file in the root directory.
»
The files are extracted under the UPG_
ALL folder of your USB flash drive.
6
Disconnect the USB flash drive from your
computer.
Step 2: Update the software
Caution
• Do not switch off the home theater or remove
the USB flash drive during the update.
1
Connect the USB flash drive containing the
downloaded file to your home theater.
•
Make sure that the disc compartment is
closed and no disc inside.
2
Press (
Home
).
3
Select [Setup] , and then press OK .
4
Select
[Advanced]
>
[Software update]
>
[USB] .
5
Follow the onscreen instructions to confirm
the update.
» Once complete, the home theater
automatically switches off and restarts. If
it does not, disconnect the power cord
for a few seconds and then reconnect it.
Update software through the
Internet
1
Connect your home theater to a home
network with a high-speed Internet access.
2
Press (
Home
).
3
Select [Setup] , and then press OK .
4
Select
[Advanced]
>
[Software update]
>
[Network] .
»
If an upgrade media is detected, you are
prompted to start or cancel the update.
5
Follow the onscreen instructions to confirm
the update.
» Once complete, the home theater
automatically switches off and restarts. If
it does not, disconnect the power cord
for a few seconds and then reconnect it.
Update the onscreen help
If the current version of the onscreen help is
lower than the latest version available on www.
philips.com/support, download and install the latest
onscreen help (see 'Check software version' on
page 27).
What you need
•
A USB flash drive that is FAT or NTFS-
formatted, with at least 35MB of memory. Do
not use a USB hard drive.
•
A computer with internet access.
•
An archive utility that supports the ZIP file
format.