Philips HTS6583, Руководство пользователя

Страница: 21 / 43

19
English
EN
Radio
Listen to FM radio on your home theater, and
store up to 40 radio stations.
Note
• AM and digital radio are not supported.
• If no stereo signal is detected, or if fewer than
five stations are found, you are prompted to
install the radio stations again.
1
Connect the FM antenna to the ANTENNA
FM 75
on your home theater.
•
For the best reception, place the antenna
away from the TV or other sources of
radiation.
2
Press
Source buttons
repeatedly until
RADIO appears on the display panel.
»
If you have already installed the radio
stations, the last channel that you listened
to is played.
» If you have not installed any radio
stations, the message AUTO
INSTALL...PRESS PLAY
appears on
the display panel. Press ( Play ).
3
Use the remote control to listen or to
change radio stations.
Play buttons
Button Action
/
or
Alphanumeric
buttons
Select a preset radio station.
Navigation
buttons
Left/Right: Search for a radio
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation of
radio stations.
BACK Press and hold to erase the
preset radio station.
OPTIONS Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
SUBTITLE Toggle between the stereo and
mono sounds.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. Switching the
tuning grid erases all preset radio stations.
1
Press
Source buttons
repeatedly until
RADIO
appears on the display panel.
2
Press .
3
Press and hold (
Play
) to toggle between 50
kHz or 100 kHz.
MP3 player
Connect a MP3 player to play audio files.
What you need
• An MP3 player.
• A 3.5mm or 6.5mm stereo audio cable.
1
Using the 3.5mm or 6.5mm stereo audio
cable, connect the MP3 player to the
MUSIC
iLINK
connector on your home theater.
•
If you use 6.5mm stereo audio cable,
connect the MP3 player to your
home theater using a 3.5mm - 6.5mm
converter jack.
2
Press AUDIO SOURCE repeatedly until
MUSIC I-LINK
appears on the display panel.
3
Press the buttons on the MP3 player to select
and play audio files.