Philips HTS4562/12, Руководство по обслуживанию

Страница: 14 / 46

3 - 1 3 - 1
DISASSEMBLY INSTRUCTIONS
Figure 1
A
Figure 2
B
Figure 6
Figure 7
Figure 3
C
D
E
2) Open the DVD Tray by using the Open/Close Button while the Set is ON and disconnect the mains supply after removing the DVD
Door.
Note: If this is not possible, the DVD Tray has to be open manually.
a) Loosen 4 screws “ E “ at the DVD Module as shown in fi gure 3.
b) Rotate the gear wheel on the side of DVD Module to remove DVD Door as shown in fi gure 4 and fi gure 5 then close the tray
manually by pushing it back in.
3) Loosen 5 screws remove the front panel.
- 3 screws “C” at the bracket as shown in fi gure 6.
- 1 screw “D” each on the left & right side as shown in fi gure 7.
Dismantling of theTop & Front Panel Assemble
1) Loosen 6 screws and remove the Top Cover by lifting the rear portion upwards before sliding it out towards the rear.
- 4 screws “A” at the back panel as shown in fi gure 1.
- 1 screw “B” each on the left & right side as shown in fi gure 2.
Figure 4
Dismantling of the VFD Board
1) Loosen 2 screws “F” on the top of VFD Board as shown in fi gure 8.
F
Figure 8
Figure 5