40
IMPORTANT!
Make sure the FM and MW
antennas are connected.
Tuning to radio stations
1
Press
TUNER
on the remote (or press
SOURCE
control at the front panel) to
select “
FM
” or “
MW
”.
2
Press
3
/
4
briefly on the remote.
➜
The display panel will show "
SEARCH
"
until a radio station with sufficient signal
strength is found.
3
Repeat step
2
if necessary until you find
the desired radio station.
4
To tune to a weak station, press
1
/
2
briefly and repeatedly until an optimal
reception is found.
Presetting radio stations
You can store up to 40 FM and 20 MW
preset radio stations in the memory.
Helpful Hints:
– The system will exit presetting mode if no
button is pressed within 20 seconds.
– If no valid frequency is detected during
Plug and Play,"
PLEASE CHECK FM
/
MW
ANTENNA
" appears.
Using the Plug and Play
Plug and Play allows you to store all
available radio stations automatically.
1
AUTO INSTALL
..
START
..
2
1
For first time setup
, press
TUNER
.
➜
"
AUTO INSTALL PRESS PLAY
"
appears.
2
Press
PLAY
B
until "
START
..." appears
on the display panel.
➜
The system will start searching from
FM band and followed by MW band.
All the available radio stations with strong
signal strength will be stored
automatically.
➜
Once complete, the last tuned radio
station will play.
Tuner Operations
DVD system’s
display panel
001-049-hts3500s-75-Eng3
16/5/05, 2:34 PM
40