24
English
Disc Operations
Repeating a section within a title/
track
1
While playing a disc, press
REPEAT A-B
at the starting point.
2
Press
REPEAT A-B
again to end the
section.
➜
The section A and B can be set only
within the same title/track.
➜
The section will now repeat
continuously.
3
Press
REPEAT A-B
again to resume
normal playback.
Program favorite tracks
(audio CDs and VCDs)
You can play the contents of the disc in
the order you want by programming the
order of the tracks to be played. Up to 99
tracks can be stored.
1
Stop playback, then press
PROG
on the
front panel to enter program mode.
2
Use the
numeric keypad (0-9)
to enter
a valid track number.
➜
"
FULL
" will appear if you have
programmed 99 tracks.
3
Press
OK
to store the track.
4
Repeat steps
2
~
3
to select other
tracks.
5
Press
ÉÅ
to start program playback.
TIPS:
The operating features described here might not be possible for certain discs. Always refer
to the instructions supplied with the discs.
Clearing the program
●
Stop playback, then press the
Ç
again.
➜
"
PROG CLR
" appears.
Helpful Hints:
– If the DVD system is disconnected from
the power supply, it will erase the program.
– For VCD, the program option is only
possible if the PBC mode is turned off.
Using the menu bar to
program
IMPORTANT!
You have to turn on your TV and set
to the correct Video In channel.
(See
page 17
“
Setting the TV
”
.)
1
Stop playback, then press
SYSTEM
MENU
.
➜
The menu bar will appear across the
top of the TV screen.
2
Press
1
2
to select
and press
4
to
enter the program menu.
PROGRAM P 00 : 00
3
Use the
numeric keypad (0-9)
to enter
the track number to be programmed.
➜
"
FULL
" will appear if you have
programmed 99 tracks.
4
Press
ÉÅ
to start program playback.
To clear the program
●
Stop playback, then press
Ç
again.
