Philips HTS3180, Руководство по обслуживанию

Страница: 12 / 50

System , Region Code , etc. Setting Produre
1)System Reset
a) Press “SETUP“ button on RC,TV will show setup menu
b) Select the menu using the and on RC
c) Go preference page to do system reset
2)Region Code Change
a) In open model, press”9” “9“ “9“ “9“ on R/C,then input desired
number to change region code :
1 USA
2 EU
3 AP
4 Australia ,NZ , Latam
5 Russia , INDIA
6 CHINA
3)Version Control Change
a) In open model, press “1“ “5“ “9“ on RC
c) Press and “ok” button to confi rm
d) TV will show message as below:
7) Upgrading new sofeware
a) Copy “sofeware fi les” into a CD-R or USB flash drive.
b) Insert the CD-R disc or USB flash drive.
c) Press DISC or USB, the system will identify the update file autometically.
d) VFD will show “Updating“ until update is complete.
* the system will switch off to standby automatically after update is complete.
e) OSD will show:
Current model
HTS3180/12
Ver26.01.2M _090619_0 Region : 6
Servo: AE.56.00.00
8032: 05.00.04.06 RISC: 05.02.00.35
OK
CAUTION!
This information is confi dential and may not be
distributed.Only a qualifi ed service person should
reprogram the Region Code.
4)Password Change
a) Press “SETUP“ button on R/C,TV will show setup menu
b) Select the menu using the and on RC
c) Go preference page select “password“ to change
* 136900 is default password supplied.
5)Check on the Sofeware Version
TV will show the version on screen.
6)Trade model
a) Press “Open/Close “ button on RC
b) Press “2” “5” “9” on R/C,VFD will display “TRA ON “ or “TRA
OFF“
b) Press and select version you want using
a) Press “SETUP“ button on R/C,TV will show setup menu
b) Select the menu using the and on RC
c) Go preference page select “Version Info“.
3 - 3
/51