Philips HTS3019, Руководство пользователя

Страница: 15 / 37

15
Select a play source
On the main unit
Press the •
SOURCE
button repeatedly to
select:
DISC
>
USB
>
FM
>
AUX 1
>
AUX 2
>
SCART IN
>
DISC
...
On the remote control
Press •
AUDIO SOURCE
repeatedly to
switch to the connected audio source.
Display Device connected to
SCART IN SCART TO TV socket
AUX 1
AUDIO IN-AUX 1
sockets
AUX 2 AUDIO IN-AUX 2
sockets
Press • RADIO to switch to FM band.
Press • USB to switch to USB mode.
Press • DISC to switch to disc mode.
2
Press to change the volume level,
then press
OK
.
The test tone is emitted from the
»
speaker.
Repeat the above setting for other •
speakers until all the speakers’
output level sounds equally balance.
To exit the menu, press
• SETUP .
To set the output delay time (centre and rear
speakers only)
1
Select [Speakers Delay] in the menu,
then press .
2
Press to set the delay time, then press
OK .
Repeat the above setting for other •
speakers until the sound output from
different speakers reach the listening
position at the same time.
To exit the menu, press
• SETUP .
Tip
Set a longer delay time if the centre speaker or rear
•
speaker is closer to the listening position than the
front speaker.
Allow 1ms setting for every 1 foot distance between
•
the speaker and the listening position.
Speakers Distance Setup
Center
Rear Left
Rear Right
0MS
0MS
0MS
Get star
ted
English
EN
1_hts3020-12_en2.indd Sec1:15 1_hts3020-12_en2.indd Sec1:15 4/2/2009 10:56:31 AM 4/2/2009 10:56:31 AM