English
16
Getting Started
Step 1: Turning on the system
Before you start...
Make sure you have completed all the
necessary connections before proceeding.
Press the
SOURCE
button on the front
panel repeatedly to select:
DISC 6CH
¤
COAX IN
¤
OPTI IN
¤
MP3 MODE
¤
FM
¤
AM/MW
¤
AUX
¤
TV
¤
DISC 6CH....
OR
Press
DISC/DI
,
RADIO
,
TV,
AUX
or
MP3 LINE-IN
on the remote control.
Press
DISC/DI
to toggle between to
DISC 6CH, COAX IN or OPTI IN mode.
Press
RADIO
to toggle between FM
and AM/MW band.
If the audio input on this unit is
connected to your TV, press
TV
to hear
the TVs sound output through this unit.
Press
AUX
to switch to the external
device that is connected to the AUDIO
IN-AUX socket on this unit.
Press
MP3 LINE-IN
to switch to the
external device that is connected to the
MP3 Line-In socket on the front panel.
Turn off to standby mode
Press
STANDBY
-
ON
(
2
).
The display screen turns off.
Step 2: Setting the speakers
You can adjust the delay times (centre
and rear only) and volume level for
individual speakers. These adjustments
allow you to optimise the sound
according to your surroundings and
setup.
Before you start...
Press
SURROUND
on the remote
control to select Multi-channel surround
mode before you adjust the speaker
settings.
Adjust the speaker delay times
(Not available in STEREO mode)
A
Press
STANDBY-ON
(
2
) to turn on
the unit.
B
Press and hold
PROGRAM
on the front
panel for fi ve seconds to access the
system setup.
To adjust the audio delay for the
centre speaker
Press
.
or
>
until ‘CENTER
DELAY’ appears.
Press
PROGRAM
on the front panel.
Rotate the
VOL
control to change the
delay time. Select from : 5ms, 3ms, 2ms,
1ms or OFF (default setting).
To remain with the previous setting, do
not rotate the
VOL
control in the next
fi ve seconds.
1_htr5205-98_EN.indd 16
1_htr5205-98_EN.indd 16
2007-03-30 11:53:52 AM
2007-03-30 11:53:52 AM
