15
EN
Note
•
This product may not be compatible with certain types
of USB storage device.
•
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•
Digital camera PTP and MTP protocols are not
supported.
•
Do not remove the USB storage device while it is
being read.
•
DRM-protected music files (MP3) are not supported.
•
Support a USB port: 5V , 1A.
Auto standby
Networked standby
When this product is connected to the
network, this product automatically switches to
networked standby after 15 minutes of inactivity.
Networked standby shortens the startup time
from standby, optimized for streaming music
from mobile apps.
ECO standby
When this product is not connected to the
network, this product automatically switches to
ECO standby after 15 minutes of inactivity. ECO
standby lengthens startup from standby, and less
power is consumed.
In the network status, you may also press and
hold on the remote control to switch this
product to ECO standby.
Note
•
If this product is in ECO standby, the red LED lights up.
•
If this product is in networked standby, the white LED
lights up and the red LED turns off.
Set display brightness
You can press
DIM
repeatedly to select a
different brightness level of the display panel on
this product.
If you select
AUTO OFF
, LED message is
switched off after 10 seconds of button
inactivity.
Apply factory settings
In case of no response from this product or
network setup issue, you may reset this product
to the default settings programmed at the
factory.
Note
•
When the factory settings restore is complete, the
product automatically switches off and restarts.
Option 1:
1
Launch Philips “HCWeSet” app on your
mobile device.
• Make sure that you connect this
product to the network.
2
Go to the App home page.
3
Tap to access the menu options.
4
Select “My Speakers”.
»
The connected devices are listed.
5
Then select “Factory Reset”, and follow the
on-screen instructions to finish.
Option 2:
1
On the bottom of this product, press
RESET
with a pin to reset this product.
Option 3:
1
In HDMI ARC mode (press
HDMI ARC
),
press twice then
Volume -
once, and
then hold down
BASS -
.
