background image

2

EN

• 

Install 

all 

batteries correctly, 

and

 - 

as 

marked on the unit.

• 

Do not mix batteries (

old a

nd 

new 

or

 

carbon 

and 

alkaline

, etc.).

• 

Remove batteries when the unit is not 

used for a long time.

• 

The batteries shall not be exposed to 

excessive heat such as sunshine, fire or 

the like.

• 

Perchlorate Material - special handling 

may apply. See www.dtsc.ca.gov/

hazardouswaste/perchlorate.

• 

The product/remote control may contain 

a coin/button type battery, which can be 

swallowed. Keep the battery out of reach 

of children at all times! If swallowed, the 

battery can cause serious injury or death. 

Severe internal burns can occur within two 

hours of ingestion.

• 

If you suspect that a battery has been 

swallowed or placed inside any part of the 

body, seek immediate medical attention.

• 

When you change the batteries, always 

keep all new and used batteries out of 

reach of children. Ensure that the battery 

compartment is completely secure after 

you replace the battery.

• 

If the battery compartment cannot be 

completely secured, discontinue use of the 

product. Keep out of reach of children and 

contact the manufacturer.

 

Apparatus shall not be exposed to 

dripping or splashing.

 

Do not place any sources of danger on 

the apparatus 

(for example. liquid filled 

objects, lighted candles).

 

This apparatus may contain lead and 

mercury. Dispose according to local, State 

or Federal laws. For disposal or recycling 

information, please contact your local 

authorities. For additional assistance on 

recycling options, please contact www.

mygreenelectronics.com or www.eiae.org 

or www.recycle.philips.com.

 

Where the MAINS plug or an appliance 

coupler is used as the disconnect device, 

the disconnect device shall remain readily 

operable.

 

Do not place this apparatus on the 

furniture that is capable of being tilted by a 

child and an adult leaning, pulling, standing 

or climbing on it. A falling apparatus can 

cause serious injury or even death.

• 

This apparatus should not be placed in a 

built-in installation such as a bookcase or 

rack unless proper ventilation is provided. 

Make sure to leave a space of 7.8 inches 

(20cm) or more around this apparatus.

Class II equipment symbol

 

This symbol indicates that the unit has a double 

insulation system.

 

This 'bolt of lightning' indicates uninsulated 

material within your unit may cause an electrical 

shock. For the safety of everyone in your 

household, please do not remove product 

covering. 

 

The 'exclamation point' calls attention to 

features for which you should read the enclosed 

literature closely to prevent operating and 

maintenance problems. 

WARNING:

 To reduce the risk of fire or 

electric shock, this apparatus should not be 

exposed to rain or moisture and objects filled 

with liquids, such as vases, should not be placed 

on this apparatus. 

CAUTION:

 To prevent electric shock, match 

wide blade of plug to wide slot, fully insert. 

Содержание HTL2160/F7



















Отзывы: