16
5
Press
CLOCK
to confi rm the clock setting.
Turn on
1
Press
.
The unit switches to the last selected
»
source.
•
To switch to standby mode:
1
Press
.
Clock is displayed (if have set).
»
The clock (if set) is displayed.
•
To switch to Eco Power Standby mode:
1
Press for over 3 seconds.
The backlight on the display panel
»
turns off.
The blue Eco Power indicator lights up.
»
Enable Easylink
EasyLink uses the HDMI CEC (Consumer
Electronics Control) industry standard protocol
to share functionality with all HDMI CEC
compliant devices over HDMI. It enables the
connected devices to control each other with a
single remote control.
Note
EasyLink (HDMI CEC) is only applicable with certain
•
criteria. Terms and conditions may vary by product.
Consult your product dealer for information.
Philips does not guarantee 100% interoperability with
•
all HDMI CEC devices.
1
Press
SETUP
for over 3 seconds.
‘Easylink On’ is displayed.
»
To disable Easylink, press and hold
»
SETUP
until “Easylink Off ’ is displayed.
EN
