Philips HR1300, Руководство пользователя

Страница: 7 / 32

7
- Do not dismantle or short-circuit the batteries. Protect the batteries
from fire, heat and direct sunlight.
- Never use any accessories or parts from other manufacturers or that
Philips does not specifically recommend. If you use such accessories or
parts, your guarantee becomes invalid.
- If the ingredients stick to the wall of the beaker or the chopper bowl,
switch off the appliance and loosen them with a spatula or add some
liquid.
- Never fill the beaker or the chopper bowl with ingredients that are
hotter than 80°C/175°F.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.
safety system
The appliance is equipped with a built-in safety system. The appliance only
functions if you press and hold the unlock button and then press and hold
the power-on button. Release the unlock button when the appliance starts
to operate. As soon as you release the power-on button, the safety
system automatically resets to its off position to protect against
unintentional operation of the appliance.
Overheat protection
The appliance is equipped with a built-in overheat protection. If you process
a heavy load, the motor unit may become hot. If this happens, the built-in
safety system switches off the appliance and the charging light lights up red.
Let the appliance cool down for 10 minutes before you continue to use it.
Error mode
If you press the unlock button longer than 2 seconds, the indicator lights
starts to flash red to indicate that the error mode is activated. If this
happens release all buttons and switch on the appliance again (see step 4, in
chapter ‘Using the appliance’).
EnglisH
Before first use
Thoroughly clean the parts that come into contact with food before you
use the appliance for the first time (see chapter ‘Cleaning’).
Preparing for use
charging
Charge the hand blender:
- before you use the appliance for the first time, or
- when one segment of the blue charging light flashes to indicate that the
batteries are low.
1 Put the adapter in the wall socket.
2 Put the appliance in the charging stand. (Fig. 2)
,
The blue charging light flashes to indicate that the appliance is
charging (Fig. 3).
Note: The adapter feels warm during charging. This is normal.
- It takes 2.5 hours to fully charge the appliance.
- Charge the appliance for at least 15 minutes to use it for a light blending
job (soup, puree).
Note: Keep the charging stand plugged in continuously and store the appliance
on the charging stand.
light indications
charging
- When the appliance is charging, the blue charging light flashes.
Batteries fully charged
- When the batteries are fully charged, the charging light lights up blue
continuously.
Batteries low
- When the batteries are low, one segment of the blue charging light
flashes (Fig. 4).
7