background image

Pos. Description 

Service Code

 44 

Insert holder 

4203 065 61520

 46 

Plastic kneader 

4203 065 63970

 47 

Metal knife (incl. protecting cover) 

4203 065 63690

 48 

Emulsifi ng disc 

4203 065 63660

 49 

Toolholder 

4203 065 63680

 70 

Housing upper part 

4203 065 64160

 71 

Housing lower part 

4203 065 64170

 72 

Mounting plate 

4203 065 64180

 73 

Gear assy 

4203 065 64220

 74 

O - ring 

4203 065 64240

 75 

Release button 

4203 065 64230

 76 

Coupling part 

4203 065 64190

 77 

Drive gear 

4203 065 64210

 78 

Sealing 

4203 065 64200

 80 

Feeding tube 

4203 065 64050

 81 

Worm shaft assy 

4203 065 64060

 82 

Coupling 

4203 065 64070

 83 

Cutting blade 

4203 065 64080

 84 

Cutting disc (Dia. 4mm) 

4203 065 64090

 85 

Cutting disc (Dia. 8mm) 

4203 065 64100

 86 

Screw ring 

4203 065 64110

 87 

Sausage horn bearing 

4203 065 64140

 88 

Sausage horn 

4203 065 64150

 89 

Feeding tray 

4203 065 64120

 90 

Pusher 

4203 065 64130

   A 

Wire connector for 2 wires 

4203 065 63190

PARTS LIST  HR 7752/01

Pos. Description 

Service Code

  1 

Blender cover 

4203 065 63470

  2 

Screw cap 

4203 065 63620

  3 

Top housing 

4203 065 63480

  4 

Switch assy 

4203 065 60630

  6 

Housing parts 

4203 065 63490

  7 

Safety switch lever 

4203 065 63580

  8 

PCB brake 

4203 065 63510

 10 

Blender coupling 

4203 065 63570

 11 

Motor assy - 230V 

4203 065 63930

 12 

Motor coupling assy 

4203 065 63590

 13 

Mounting plate 

4203 065 63600

 14 

Adjusting piece 

4203 065 63540

 15 

Motor screw 

4203 065 60310

 16 

Tooth belt 

4203 065 60440

 17 

Belt wheel 

4203 065 63560

 18 

Single speed gear 

4203 065 63610

 19 

Cordset EURO 

4203 065 63980

 

 

Cordset UK 

4203 065 63990

 

 

Cordset SWISS 

4203 065 64010

 30 

Press cone 

4203 065 64030

 31 

Sieve 

4203 065 63870

 32 

Pusher closed bowl 

4203 065 63800

 33 

Bowl lid 

4203 065 63760

 34 

Lid bearing 

4203 065 63770

 35 

Closed bowl 

4203 065 63780

 41 

Insert slicing medium 

4203 065 61540

 42 

Insert shredding medium 

4203 065 61560

SERVICE INFORMATION :

-  The blender coupling on the motor shaft has been provided 

with a customary left-handed thread.
The drive coupling (item 10) can be detached by means of 
a hammer and a screwdriver. Strike the screwdriver with a 
short sharp blow and remove the drive coupling, or block 
the acc. drive wheel (item 17) and thereby the rotor shaft, 
by sticking a pin through the hole (5 mm dia. – marked with 
an arrow) in the bottom plate.

-  The assembly of the accessories depends on the national 

version.

-  For specifi c versions, the component confi guration may 

differ from the one shown on the exploded view. 
However, the actual components can be distinguished by 
their code numbers.

-  Make sure that all functions, including the safety devices, 

are working correctly after you have completed the repair.

Automatic resettable cut-out

 (part of item 11)

To prevent damage due to overheating, the appliance has 
been equipped with an automatic cut-out system.
This system will automatically cut off the power supply when 
the appliance overheats.

If the appliance suddenly stops running:

-  Unplug the appliance
-  Switch off the appliance
-  Let the appliance cool down for 15 minutes
-  Plug the appliance in again
-  Switch the appliance on again

Safety lock

 (item 7)

Place the lid on the bowl in the right position. The appliance 
will only function if the line on the applinace is directly opposite 
the mark on the lid of the food processor bowl and the same 
holds for the other accessoires. The built-in safety lock will now 
be deblocked and you can turn the appliance on.

Important:

The appliance will not function, when the blender coupling 
(item 10) has not been protected by the blender cover (item 1).

Note:

The blender cover can only be removed, when the bowl 
including the bowl lid or the meat mincer are not mounted on 
the foodprocessor.

How to set the belt tension:

Step 1: Give 30 N pretension force on the adjusting plate to 

minimise the distances between the belt and the belt 
wheels

Step 2: Reduce the tension force from 30 N down to 10 N 

which is the required belt drive force for the appliance.

Step 3: Fix the adjusting screw on the adjusting plate when the 

tension force reaches the value of 10 N (after coming 
down from 30 N!)

MAINS

R1

R2

C1

D1

U

Change-over switch

in braking position

1

2

P

red

brown

yellow

blue

blue

brown

yellow

white

red

S1

S2

black

F1

F2

OFF

Rotor

Отзывы: