Philips HD9220/40, Руководство по обслуживанию

Страница: 12 / 27

HD9220/40
3-9
REPAIR INSTRUCTIONS
General remark;
When you need to disconnect a wire from the crimp housing, please cut the wire half way (See

in the picture below) and
always connect the wires with a new 2 wire crimp housing 4222 459 51851. To crimp the housing use the Lobster AK25 No2 or
Muromoto Tekko MR30A Nr 2 with Air pressure = 6 kg/cm².
Crimp instruction CE2
1) Strip wires: 16mm (0.63 in) Max. 13mm (0.51) Min.
2) Twist the wires together along the entire length of the strip and insert them into crimp housing .
3) Center the crimp tool on the sleeve.
4) Crimp the housing with 6 kg/cm².
Route the wire route, using 5 tie-wraps according the picture below;