Philips HD8844 Скачать руководство пользователя страница 75

Страница: 75 / 84

ENGLISH

Machine actions

Causes

Solutions

Coff ee is too weak
(see note).

This might occur when the ma-
chine is automatically adjusting
the dose.

Brew a few cups of coff ee as
described in the “Saeco Adapting
System” chapter.

Coff ee is too coarse.

Change coff ee blend or adjust
grinding as explained in the “Adjust-
ing the Ceramic Coff ee Grinder”
chapter.

Coff ee does not have enough
crema (see note).

The blend is unsuitable, coff ee is
not freshly roasted or the grind is
too coarse.

Change coff ee blend or adjust
the grind setting as explained in
the “Adjusting the Ceramic Coff ee
Grinder” chapter.

No coff ee is brewed, coff ee
is brewed slowly or drop by
drop (see note).

The coff ee grind is too fi ne.

Change coff ee blend or adjust
grinding as explained in the “Adjust-
ing the Ceramic Coff ee Grinder”
chapter.

The circuit is not primed.

Prime the circuit (see the "Using the
Machine for the First Time" chapter).

The brew group is dirty.

Clean the brew group (see the
"Weekly Cleaning of the Brew
Group" chapter).

The dispensing spout is dirty.

Clean the dispensing spout and its
holes.

The machine circuit is clogged by
limescale.

Descale the machine.

Coff ee leaks out of the coff ee
dispensing spout.

The coff ee dispensing spout is
clogged.

Clean the coff ee dispensing spout
and its holes.

No hot water or steam is
dispensed.

The hole of the steam/hot water
wand is clogged.

Clean the hole of the steam wand
using a pin.

Make sure that the machine is
off and has cooled down before
performing this operation.

The circuit is not primed.

Prime the circuit (see the “Using the
Machine for the First Time” chapter).

The machine circuit is clogged by
limescale.

Descale the machine.

Milk does not froth.

The Automatic Milk Frother is in-
serted too deep. No milk is being
suctioned.

Leave the Automatic Milk Frother to
cool down. Move it slightly down-
wards. Reposition it in its correct
seat.

Содержание HD8844





















































































Результаты поиска

Содержание HD8844

Отзывы:

Похожие инструкции для HD8844

Бренды по названию

Популярные бренды

Philips HD8844, Руководство пользователя

Результаты поиска

Содержание HD8844

Отзывы:

Похожие инструкции для HD8844

Бренды по названию

Популярные бренды