background image

• 3 •

English

CAUTION

This appliance is for household use only. Any servicing, other than cleaning and 
user maintenance, should be performed by an authorized service center. Do not 
immerse machine in water. To reduce the risk of fire or electric shock, do not 
disassemble the machine. There are no parts inside the machine serviceable by 
the user. Repair should be done by authorized service personnel only.

1.

 Check voltage to be sure that the voltage indicated on the nameplate 

corresponds with your voltage.

2.

  Never use warm or hot water to fill the water tank. Use cold water only. 

3.

  Keep your hands and the cord away from hot parts of the appliance during 

operation.

4.

  Never clean with scrubbing powders or harsh cleaners. Simply use a soft 

cloth dampened with water.

5.

 For optimal taste of your coffee, use purified or bottled water. Periodic 

descaling is still recommended every 2-3 months.

6.

  Do not use caramelized or flavored coffee beans.

INSTRUCTIONS FOR THE POWER 

SUPPLY CORD

A. 

A short power-supply cord (or detachable power-supply cord) is to be 
provided to reduce risks resulting from becoming entangled in or tripping 
over a longer cord.

B. 

Longer detachable power-supply cords or extension cords are available 
and may used if care is exercised in their use.

C. 

If a long detachable power-supply cord or extension cord is used,

1. 

The marked electrical rating of the detachable power-supply cord or 
extension cord should be at least as great as the electrical rating of the 
appliance

2. 

If the appliance is of the grounded type, the extension cord should be a 
grounding-type 3-wire cord, and

3. 

The longer cord should be arranged so that it will not drape over the 
counter top or table top where it can be pulled on by children or tripped 
over.

Содержание HD8837/06





























Отзывы: