Philips HB811, Руководство пользователя

Страница: 15 / 97

Troubleshooting guide
The appliance may fail to work properly because it has not been
installed or is not used in accordance with the instructions. In that case
you are able to solve the problem yourself by following the
troubleshooting tips below.
ENGLISH
15
Possible cause
The lamp unit has not been put in the right position (see
chapter 'Preparing for use'.
The plug has not been (properly) inserted into the wall
socket.
There is a power failure. Check by means of another
appliance.
The lamps are still too hot to go on. Let them cool down
for 3 minutes first.
The appliance was not sufficiently cooled and the
overheating protection switched appliance off
automatically. Remove the cause of overheating (e.g.
remove a towel that is blocking one or more vents). Wait
for 10 minutes and switch the appliance back on.
Check the fuse of the circuit to which the tanning
appliance is connected.The correct fuse type is a 16A
standard fuse or an automatic fuse.The fuse may also
blow because you have connected (too many) different
appliances to the same circuit.
You are not following the tanning schedule suitable for
your skin type.
The distance between the lamps and the surface you lie
on is larger than described.
When the lamps have been used for a long time, the UV
emitted will decrease.This effect only becomes
noticeable after several years.You can solve this problem
by selecting a longer tanning time or by having the lamps
replaced.
Problem
The appliance does not
start
The fuse cuts off the
power when you
switch on the tanning
appliance or during use.
Poor tanning capacity