6
4 Bluetooth connection
m
Warning
• These instructions
apply only when the
GoPure car air purifier is
connected the first time
or the Bluetooth on the
smartphone has been
reset to factory settings.
• You cannot set up two
air purifiers at the same
time. The only way to set
up multiple air purifiers is
to repeat the procedure
for each machine.
• Please ensure a
distance of less than
5 meters without any
obstacle between the
smartphone and GoPure
car air purifier. It is
recommended to set up
pairing in the car.
• “Air Matters” app
support above Andorid
5.0 and IOS 10.0 system,
older version system
may cause app function
failure. "Siri" function
support IOS12.0 and
above system.
1.
Connect GoPure car
air purifier to a power
source and turn on the
machine.
2.
Turn on Bluetooth on
the mobile phone. For
an Android device, open
Settings app and turn
on Bluetooth. Look for
“GoPure” in the list of
devices. Click to initiate
pairing.
3.
Scan the QR code
below to download and
install “Air Matters” app.
4.
Open app. Click on
Connect an air purifier
on the main page to
access a list of Philips
models. Refer to the app
instructions to add the
car air purifier
“GoPure 9301”.
5.
Return to the main
page and see “Philips
GoPure” has been
added. The app interface
will show “GoPure 9301”
and real-time PM1,
PM2.5, PM10 and Gas
concentration.
6.
If you encounter
any problem, please
refer to Help or the
troubleshooting
information page for a
wide range of updated
troubleshooting tips.
